TeleControl is a two-way remote control and monitoring unit. You can use text messages, data and phone calls as a means of communication with it. TeleControl can be used in holiday homes, motor caravans, boats, and private homes and real estates. TeleControl can also be used for monitoring various machines, passage control, telemeasuring, reading of gas, electricity and water consumption meters.

Methods of use

You can use your mobile phone for sending commands to TeleControl, you do not need any other additional equipment. The alarms and measurement values from TeleControl are sent as text messages to the specified users' mobile phone numbers. TeleControl can also make a phone call in addition to the text message thus ensuring that the alarm condition is brought to your attention as soon as possible.

You have the option of naming the commands as you please so that remembering them is easy and effortless. User named commands are called macro commands. Furthermore, you can command TeleControl with phone calls, too.

You can also contact TeleControl device through GSM data connection for easy setup of your device. This feature comes in handy, for example, when you need to update the unit's entire phone directory.

The strong information security of the unit is based on the identification of the caller's phone number. Users can have varying access permissions to your TeleControl. For instance, one user might have the permission to open a gate while the other might not.

 Features

The TeleControl product family consists of three different models that can be equipped with necessary components depending on the monitored location and your needs. The main differences are listed in the table below.

( ) = requires an extension card 

Alarms

You can program each alarm channel independently from one another:

• Routing of alarm messages to the selected recipients
• Alarm transfer method:

- Text message

- Phone call

- Text message and phone call

- Text message and phone call in cyclic fashion (a call is made to one person at a time)

• Alarms can be blocked by switching from normal mode to disable mode
• Event or hour counting

The alarm condition is set off when you answer to the alarm call. You can determine how often TeleControl repeats the alarm call and when the alarm expires if you do not answer to the calls.

Remote Control

TeleControl has at least three outputs. Any of these relays can be set closed, opened, or pulsed to the opposite state. The pulse command is particularly useful for opening electric locks and for resetting various kinds of devices. The pulse command can also be repeated automatically. Then the output will give a certain number of pulses that have the requested length. You can also use phone calls for controlling the outputs. This is useful for opening and closing door locks and gates without keys. TeleControl can send so-called confirmation messages in response to received commands if you wish.

The commands can have as descriptive names as you want. For example, an output that is used for heating, works with commands: #HEATING ON and #HEATING OFF.